Thank you for downloading a miniature figure from Design Scan Print 3D.
Within the download, you’ll find several files, and this page quickly outlines each file, why you may need it and how to use them.
Preview Image Files (.jpg)
These can be used to help you archive and preview the files without opening the 3D files. If you are a Commercial tier Patreon subscriber, you can use these files on your store and media for free.
3D Files (.obj & .stl)
The 3D files are split into 2 groups, files labelled “Full Height” and “16mm With FDM Supports”. The .obj and .stl files are identical, they are just saved in different 3D formats to suit all 3D printers.
Resin Printers
If you’re using a resin printer, you should use the Full Height models, and re-scale to your desired height in your slicer or 3D application. Your slicer will generate the supports.
FDM Printers
If you’re using an FDM printer (plastic filament), then you can either do the same as with the resin printers; use the Full Height models, re-scale and generate your own supports.
Or you can use the “16mm With FDM Supports” files. As the name suggests, the figures have been re-scaled to 16mm Garden Rail scale, and supports have been created for easy 3D printing.
The reason I’ve done this is because I print using an FDM printer at 16mm scale, and historically this has been the scale that I’ve created my work for. Also, the 16mm scale sits between G Scale and 7/8th garden scales, so you can scale the 16mm versions to print at these scales too.
To scale from 16mm to G Scale, adjust the scale by 83%
To scale from 16mm to 7/8th, adjust the scale by 137%
Mix File
The final file type you’ll find is the .mix file. To open this file you’ll need to download MeshMixer https://meshmixer.com/download.html
This piece of software is used to manipulate, fix and edit 3D files for 3D printing. For the miniature figure files, MeshMixer is used to generate the tree supports. You can use the .mix file to alter the support files if you are perhaps printing at a different scale, or are have difficulties with supports. However as I test print all the files before release, you probably won’t need these files.
Further Assistance
Email me at info@designscanprint3d.co.uk with any questions, queries or comments.
Looking for more 3D files?
Each month I release a new miniature figure for free via email. Subscribe to get the new figure each month at https://www.designscanprint3d.co.uk/free-miniature-figures-and-files/
Looking for even more figures and models to 3D print?
Buy models at https://designscanprint3d.e-junkie.com/
Get exclusive figures and models each month at https://www.patreon.com/dsp3d
Many thanks,
Dean
Design Scan Print 3D
