3D Printing At Home

3D Printing At Home

So you’re curious about 3D printing at home. For less than £250 you can be up and running with your own 3D printer.

 

So often the first question is, what 3D printer should I buy? As with most things in life, there’s a wide range of options. Feel free to do your own research, but if you’re looking for something else to get to grips with, is friendly on your wallet, and has a bucket load of support and communities, then you can’t go wrong with the Ender 3, specifically the Ender 3 V2.

 

The Ender 3 V2 is what I print with at the moment for garden rail scales (G Scale and larger), and here’s why I recommend it –

The cost – It’s well under £200 to buy brand new. Beware of picking up 2nd hand printers, it can often be a false economy.

The quality – I was blown away by how good the prints can be with the Ender 3 V2.

Spare parts – Things will go wrong with 3D printing, but sourcing and replacing spare parts are cheap and easy.

The communities – The Ender 3 has a huge following, and as such you’ll find 100s of YouTube videos, numerous Facebook and online groups to help you through any issues.

 

Along with the printer, you’ll also need filament (the plastic which the 3D printer uses), and something to keep your build plate clean, such as Isopropyl alcohol spray.

Essentially, that’s it.

Most people will replace the crappy plastic extruder that comes with the Ender 3 (the part of the printer that feeds the filament), as this will break after a short while anyway. You’ll also want some better quality bowden tube and some spare nozzles, as these will be come clogged from general use, and should be considered as just a part of general maintenance. You’ll hear a lot about “upgrades” from other users, but in my experience, upgrades really aren’t needed unless you plan to print with some exotic filaments. Often people will “upgrade” to get around a certain issue they’re having, but they’re often just masking the problem, rather than finding the cause of the problem.

 

The biggest downside to 3D printing at the moment is that unless you’re willing to spend £1000+ on a printer, expect to spend time tinkering, adjusting and testing until you have your machine dialed in. It can feel like a steep learning curve, but use the online content or communities to help you. 99% of the time, someone else will have had the same issue, and figured it out.

 

For more details on building, setting up, printing profiles and filaments, check out my 3D Printing Wiki page which goes into a lot more detail.

 

Alternatives to the Ender 3?

So what are the alternatives to the Ender 3 printer? 3D printing in resin is really becoming much more accessible and cost effective. Resin printers don’t use filament, instead they use liquid resin, and print through exposure to light.

The advantage resin printers have is their ability to print much finer details, making them really popular with smaller scales, although many of the garden rail scale folk now use resin printers, and in fact I will be exploring resin printers soon too.

The downside to resin printers is the need for extra equipment and steps (such as wash stations and UV curing stations).

I’ve heard really good things about the Elegoo range of printers, so check them out if you’re considering a resin printer.

 

Don’t want to buy a printer?

If the idea of owning and running a 3D printer sounds a bit daunting right now, then there is an alternative, use a 3D printing service.

Services such as 3D Print UK or Shapeways will 3D print your figures and models. The process isn’t overly complicated, essentially you upload the 3D file, choose your material and finish, and order. There is often a minimum order fee, and the costs will eventually be higher than running your own machine. However the quality of these 3D prints are top notch, and you also have the choice of different materials. Fancy a gold figure? Then head to Shapeways, and open your wallet!!

Another alternative is to check out my trusted suppliers. These suppliers are generally smaller scale businesses, printing in resin. I have personally tested their prints, hence why they are trusted. These suppliers have access to my catalog of figures, and will print custom 3D models too. If you’re looking for someone to print, without the more complex process of 3D Print UK or Shapeways, then get in touch with these guys.

 

What to Print?

So if you’re ready to print, you’ll need to create or source 3D files.

As luck would have it, I have loads of content to download from miniature figures to props and architecture, all ready for 3D printing. Just head to The Digital Downloads Page for more details.

You can also find 1000s of models to download from websites such as Thingiverse and Cults3D.

Need further help?

Feel free to drop me an email at info@designscanprint3d.co.uk and I’ll get back to you.